XA type single-stage single-suction centrifugal pump is used to pump clean water and liquids with physical and chemical properties similar to water. It is suitable for factories, mines, urban water supply and drainage, air conditioning and fire protection, and farmland drainage and irrigation.
Head: Head 12.5-100m
Transfer: Speed 1450-2900rmp
排灌之用。 XA type pump is used for sucking clean water and liquid with physical and chemical properties similar to water. It is suitable for factories, mines, urban water supply and drainage, air conditioning, fire protection and farmland drainage and irrigation.
Pumps with the same specifications have different performances due to changing the outer diameter of the impeller (add A, B, C and other letters after the pump model).
The pump has a simple mechanism, reliable performance, small size, light weight, good anti-cavitation performance, low power consumption, and convenient use and maintenance.
XA pumps are versatile, with a full range of 60 specifications, but using only four shafts; shafts, bearings, sleeves, shaft seals, impeller fasteners, etc. of the same specification can be interchanged; suspensions for all series pump There are only five.
The speed of the pump is divided into 2900r / min and 1450r / min or 1480r / min.
The performance is as follows: 2900r / min 1450r / min or 1480r / min
Maximum flow: 132L / S 300L / S
Maximum total head: 100m 55m
Maximum speed: 3500r / min (when used for 60 cycle power, the diameter of the impeller is reduced)
Maximum working temperature: 105 ° C
Shaft seal: Packing seal or mechanical seal Minimum working temperature: -10 ° C
Working pressure: Generally 1MPA, if you need to increase to 1.6MPA, please specify when ordering.
Product standard: DIN24255; BS EN733